Corrosion Check Water Test
Couldn't load pickup availability
Talk to a water expert
Crystal Quest Corrosion Check Test
Crystal Quest has partnered with National Testing Laboratories, a trusted leader in water analysis, to provide accurate testing for drinking water in homes and buildings
This test evaluates contaminants and water characteristics that contribute to corrosion. Signs of corrosion may include blue-green staining in sinks or tubs and pinhole leaks in copper pipes. The package analyzes copper and lead in both first-draw and flush samples, along with other factors linked to corrosion, helping you identify and address potential plumbing and water quality issues.
Testing is simple and convenient: just collect your sample and return it for analysis.
Get Results in 3 Easy Steps
1. Collect Sample
Fill kit’s bottles with water & complete enclosed form.
2. Return Sample
Return kit using guaranteed next-day delivery.
3. Receive Report
Receive clear results using EPA standards.
Specifications
Parts And Components
Full list of contaminents
Corrosion Check
Metals
- First Draw Lead0.001
- Flush Lead0.001
- First Draw Copper0.004
- Flush Copper0.004
- Calcium2.0
- Manganese0.10
Inorganic Chemicals & Physical Factors
- Alkalinity (Total as CaCO3)20
- Chloride5.0
- Total Dissolved Solids20
- Hardness10
- pH (Standard Units)-
- GSulfatelyphosate5.0
- Corrosivity (Langelier Saturation Index)-
Complete Analyte File
Installation Instructions
Corrosion Check Instructions
Sampling Instructions - Please Read Before Starting
Step 1
After the blue ice pack has been in your freezer for at least 8 hours, you can collect your water sample from an appropriate water faucet or spigot. If the spout has a strainer or aerator, remove it prior to sampling
Step 2
Samples must be shipped the same day they are collected via guaranteed next day delivery and must be collected after 1:00 p.m. EST to minimize time in transit. Do not collect and/ or ship your samples on a Friday, Saturday, Sunday, or the day before a National Holiday.
Fill all of the bottles, without rinsing as they may contain preservative necessary to ensure accurate results.
First Draw Bottle - First thing in the morning after the water has been sitting in the pipes overnight or at least 6 hours, youwill need to fill the bottle labeled "First Draw" sample. Before you use any water from the tap, fill thesample bottle marked first draw as soon as you turn on the tap and cap securely.
Flush Bottle - Let the water run for 3-5 minutes and then fill the bottle marked "Flush" completely and cap securely.
Unlabeled Bottle - Finally, fill the last bottle completely and cap securely. Return all 3 bottles to the cooler.
Step 3A
Complete the enclosed lab form, making sure to indicate the collection date and time you sampled, type of water, and sample identification (e.g. kitchen sink, well head,etc.) Return the blue ice pack to the kit and place the kit back in the cardboard box with the completed lab form.
Step 3B
Make arrangements to ship the kit by guaranteed next day delivery [or drop the kit off at our laboratory within 24 hours of collection, Monday to Friday, 8:30 am to 5:00 pm] to the following address:
National Testing Laboratories
556 South Mansfield Street
Ypsilanti, MI 48197
If we do not receive your sample within 24 hours of sample collection or if you have not provided the date and time of collection, the bacteria results will be marked INVALID!
Sampling Instructions
Shipping rates are calculated at checkout based on weight and destination. Most orders ship within 1-3 business days directly from the manufacturer's warehouse; ground delivery typically takes 3-8 business days.
See our Shipping Policy for full rate and delivery details. Questions? Contact contact@reinwaterusa.com.
Replacement filters are covered by manufacturer warranty against defects in materials and workmanship. Contact contact@reinwaterusa.com within 30 days of delivery for return authorization.
Note: Installed or opened filter cartridges cannot be returned.